$10.00

Item Nbr. A 5

A-5 Ball Bearing

This is a new A-5 ball-bearing that fits Albion 2 and 3 speed lightweight transmissions from 1931....more

$7.00

Item Nbr. A1197

5/8" to 3/ 4" Clutch Adapter

This is a new 5/8" to 3/4" clutch adapter for a Rokon with a 2 stroke motor. This will allow ...more

$15.00

Item Nbr. A1198

Salsbury 330 Torque Converter Nut

This is a CNC machined nut that is used to attach a Salsbury 330 torque converter driver clutch ....more

$0.25

Item Nbr. A1236

#506 Woodruff Key

This is a #506 Woodruff key for crakshafts on a 82007 Rokon motor.

$10.00

Item Nbr. A1237

Exhaust Manifold Stud Kit

These studs and nuts work well with the cast aluminum exhaust manifolds on the older..more

$2.00

Item Nbr. A1238

Salsbury 330 Clutch Lock Tab

$6.00

Item Nbr. A1247

Flywheel Side Crankshaft Seal

$12.00

Item Nbr. A1248

Front Mount Cylinder Head Bolts and Spacers

These are the 4 bolts and spacers that attach the front motor mount to the engine in a ...more

$25.00

Item Nbr. A1249

Omega Electronic Ignition Module

This unit will replace the points on a West Bend 820 and the Chrysler Power Bee 820.

$12.00

Item Nbr. A1251

Clutchside Crankshaft Seal

$48.00

Item Nbr. A1266

Gasket, Bearing and Seal Kit

This is a gasket, bearing and seal set for West bend 820s, Chrysler Power Bee 820s and US820 2 ...more

$11.99

Item Nbr. A1287

Gasket Kit

This is a gasket set for West bend 820s, Chrysler Power Bee 820s and US820 2 stroke engines. The gaskets are 1/32" thick.

$5.00

Item Nbr. A1299

Copper Exhaust Gasket

This is a West Bend 820 Copper Exhaust Gasket.

$5.00

Item Nbr. A1306

Mitten Starter Handle

This is a mitten starter handle. Not recommended for high compression motors.

$3.00

Item Nbr. A1308

Spark Plug Index Washers

Three different thickness washers allow indexing of the spark plug gap towards the piston.

$2.00

Item Nbr. A1309

WICO Points Gasket

This is a WICO points gasket.

$38.00

Item Nbr. A1326

1" Carb Elbow

This is a 1" carb elbow for a Rokon motorcycle. This is an upgrade to the standard 7/8" elbow.

$98.00

Item Nbr. A1327

PVL Electronic Ignition

This is PVL electronic ignition mounted on a new production Wico points stator plate. This unit replaces the Wico coil... more

$2.00

Item Nbr. A1328

1/2" Long Pull Starter Bolts

These flat head bolts will align the thinner steel Tecumseh and Fairbanks Morse recoil starters.

$2.00

Item Nbr. A1329

5/8" Long Pull Starter Bolts

These flat head bolts will align the thicker aluminum Fairbanks Morse recoil starters.

$1.00

Item Nbr. A1330

7/16-20 UNF Left-hand Flywheel Nut

This is a 7/16-20 UNF Left-hand clutch or flywheel nut. These will not work on Rokons. For engines with even last digit model numbers.

$1.00

Item Nbr. A1350

7/16-20 UNF Right-hand Flywheel Nut

This is a 7/16-20 UNF grade 8 Right-hand clutch or flywheel nut. For engines with odd last digit model numbers.

$52.50

Item Nbr. A1331

Dual Ring Piston

This is a brand new dual ring piston. It fits West Bend 820, Chrysler Power Bee 820 and US 820 motors.

$12.00

Item Nbr. A1332

Piston Rings

These are brand new piston rings. They fit all 820 motors. Sold in pairs.

$66.00

Item Nbr. A1335

PVL Electronic Ignition Module

This ignition module fits newer US820 motors. A clear .0075" thick shim is included for setting the air gap.

$8.00

Item Nbr. A1336

Fuel Cut Off Valve

This fuel cut off valve has 1/8-27 NPT threads, a 1/4" hose barb and a filter. The filter is removable. Some tanks will require a 1/8" x 1/4" NPT pipe bushing.

$60.00

Item Nbr. A1338

Heat Deflector

This aluminum heat deflector was designed to fit under both 3 and 5 wire guards. It may require some minor fitting when used with a 5 wire guard.

$85.00

Item Nbr. A1340

PVL Electronic Ignition for Prestolite

This is PVL electronic ignition mounted on a used Prestolite coil fork. This unit replaces the Prestolite coil on the Chrysler 820 engines. The tops... more

$5.00

Item Nbr. A1342

Spark Plug

This is a new NGK B6HS spark plug.

$5.75

Item Nbr. A1346

.062" thick Cylinder Head Gasket

This is a .062" thick Cylinder Head Gasket

$5.75

Item Nbr. A1347

.032" thick Cylinder Head Gasket

This is a .032" thick Cylinder Head Gasket

$45.00

Item Nbr. A1351

Angle Plug Cylinder Head

This is a new angle plug cylinder heard for a Rokon. It has the cast boss for a compression release but is not machined.